This application is for people who have a 3D printer or work with 3D printer control files (gcode).
It can visualize Gcodes and simulate the 3D print process. The App is able to show how your print will look like, allowing you to check how your print should turn out, making it easier to spot errors and fix them instead of wasting filament.
Its also good to learn and understand how 3D Printing works. See how perimeters, infill or support is printed layer by layer.
"GCode" is a programming language which tells 3D printers (and others) how to make a model.
GCode Simulator recognizes the print speeds and can simulate the print in realtime, but you can also speedup the prints (fast forward). Each layer is painted in a different color to see how a layer overlaps with the layer below.
In addition the new version has a printer control panel which allows you to connect and control a real 3D printer using USB-OTG cable (or Bluetooth). It offers basic printer control buttons(XYZ Movement, Extruder, Heat,..) for manual operations. Full printing is only supported in the full GCodePrintr app.
Refer to the homepage for more information: http://gcodesim.dietzm.de
GCodeSimulator analyses the Gcode file and prints additional information like:
-print time
-used filament
-yx move distance
-print object dimension
-average print speeds
-number of layers
-layer details
-speed distribution / Acceleration
-weight and price of the printed object
...
The GCode Print simulator allows the following actions:
Load a Gcode file
Show details about the loaded Gcode
Speed up/down
Jump to next Layer
Jump to previous Layer
Restart from first Layer
Pause
Quit
Developed for reprap printers but should work with other printers (e.g. printrbot,ultimaker) as well, tested with Slic3r and skeinforge generated Gcodes. MakerBot firmware talks using a proprietary protocol called S3G where as others use raw G-Code, therefore only the gcode simulation is supported.
The Printer Control Feature requires a android device with USB-OTG support and a USB-OTG cable. (or bluetooth).
See GCodePrintr App for full printing support.
GCodeSimulator for PC can be found on http://gcodesim.dietzm.de or on Thingiverse
PROBLEM SUPPORT
----------------
In case of problems please check on the homepage if the problem is already described.
If not, its best to generate a problem report with the app itself. (long press on console -> send by email)
You can also write an email to gcode@dietzm.de, I'm willing to fix all problems in time.
Google Play Review comments are not adequate for reporting bugs because they don't allow a real communication.
Join the Google+ community to ask questions, request features or raise bugs:
https://plus.google.com/communities/116436892101925074251
Please note: this App makes use of Google Analytics to collect some anonymous statistical data e.g. number of starts, connects via USB OTG, connects via bluetooth,.. The collected data is only used to improve the App behaviour.
这个应用程序是谁的人有一个3D打印机或工作，3D打印机的控制文件（G代码）。
它可以直观Gcodes和模拟3D打印过程。该应用程序能够显示您的打印将是什么??样子，可让您检查您的打印应该怎么翻出来，使其更容易发现错误并修正浪费长丝他们，而不是。
它也很好地学习和了解3D打印是如何工作的。怎么看周边，填充或支持由层印刷层。
“G代码”是一种编程语言，它告诉3D打印机（及其他）如何使一个模型。
G代码仿真识别的打印速度，并可以模拟实时打印，而且还可以加速比打印件（快进）。每个层被涂以不同的颜色来看到的层与下面层如何重叠。
此外，新版本有一台打印机的控制面板，它允许您连接和控制使用USB-OTG连接线（或蓝牙），一个真正的3D打印机。它提供了基本的打印机控制按钮（XYZ运动，挤出机，热火，...）进行手动操作。全打印仅在完整GCodePrintr应用程序的支持。
请参阅网页以获取更多信息：http://gcodesim.dietzm.de
GCodeSimulator分析G代码文件和打印像其他信息：
-print时间
- 二手丝
-yx移动距离
-print对象维度
- 平均打印速度
层-number
-layer细节
- 速度分布/加速
-weight打印对象的和价格
...
在G代码打印模拟器允许采取以下行动：
加载G代码文件
有关装载G代码显示详细信息
加速/减速
跳转到下一层
跳转到上一层
从第一层重新启动
休止符
放弃
开发的RepRap打印机，但应与其他打印机（如printrbot，ultimaker）为好，测试了Slic3r和skeinforge产生Gcodes。使用专有协议称为S3G其中为其他人使用原始的G代码，MakerBot固件会谈，因此仅支持G代码的仿真。
打印机控制功能需要与USB-OTG支持和USB-OTG连接线的Andr??oid设备。 （或蓝牙）。
见GCodePrintr应用程序的完整的打印支持。
GCodeSimulator的PC可以在http://gcodesim.dietzm.de或Thingiverse找到
问题支持
----------------
如遇问题，请在主页上如果已经说明了问题。
如果没有，其最好以产生一个问题报告与应用程序本身。 （长按控制台 - >通过电子邮件发送）
你也可以写电子邮件到gcode@dietzm.de~~V，我愿意及时解决所有问题。
谷歌播放审查意见不足以用于报告错误，因为他们不允许一个真正的沟通。
加入了Google+社区提问，请求功能或提升的错误：
https://plus.google.com/communities/116436892101925074251
请注意：这个程序是利用谷歌Analytics（分析）来收集一些匿名的统计数据，例如启动次数，通过USB OTG连接，通过蓝牙连接，..收集的数据仅用于改善该应用程序的行为。

See http://3dprintapps.de/version25.html
New 3d View
New Tutorial guide
German translation
New "Recent Files" dialog
New "Fit to Screen" Zoom feature
New Macros - Filament change macro
Move aside when pause
New "Print completion Dialog" and Sharing feature
Easy way to enter Temperatures
Macro special keywords
CH341 serial chip support
Support for non-square and custom bed size
Paint non-print moves (travel) as full lines (for CNC)
Tasker Integration