NAVAnDrone is an application beta project from Universidad Politécnica de Valencia (Spain). It try to manage an autopilot embedded on the Parrot UAV AR.DRONE.The device can SEND, EXECUTE and KILL the embedded AR.DRONE APP.Also, it's possible to do a manual pitch and roll control with device's sensors.Please, note that it's a beta version. Only tested on:- Samsung Galaxy S- ARCHOS G101Not tested on AR.DRONE 2AUTOMATIC CONTROLTo successfully manage Autopilot vehicle, it requires the following steps:1 - Turn the vehicle.2 - Connect to the Wi-Fi AR.Drone until the INFO panel display connection and a different IP from 0.0.0.0.If you have not submitted the application yet AR.Drone:3 - Send the application via Options Menu -> Send AR.Drone APP.If sent correctly:4 - Begin implementation of the AR.Drone using Menu Options -> RUN APP AR.Drone.5 - Wait for it to appear in the Info panel CONNECTED state.6 - Place the desired reference point on the drawing surface.7 - Press the RUN button.If it can't connect, you could try:- Make telnet to its IP (192.168.1.1)- Go into default ftp directory with "cd data/video"- With "ls" make sure that there is the navandrone file- if so, execute with "./navandrone"- if not, report!I would be grateful if you record your own videos running the autopilot to improve the performance of it. You could report it by YOUTUBE or mail.